Melt Pressure Transducer
High Accuracy Flexible Melt Pressure Transducer
Model : PT124G-112/112T/123/123T
What It's For
The PT124G-112/112T/123/123T high precision melt pressure transducers are ideal for the measurement of melt pressure in extrusion processes at temperatures up to 350℃.This series are produced with special materials and alloyed elastic diaphragm together with delicate processing and debugging. The main characteristics are high accuracy and small zero and span shifts caused by changes in process temperatures. The model PT124G-112T/123T comes with temperature sensor, with type J, K, E optional.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 3.33 mV/V, 2mV/V
- Input Voltage : 10VDC
- Repeatability : +/- 0.2%FSO
- Bridge Resistance Input : 345 Ohms minimum
- Bridge Resistance Output : 350 Ohms +/- 10%
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 300 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Electrical connector : 6 PIN connector
- Process connector : 1/2″-20UNF, M14×1.5, M18×1.5 Optional
It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
Economic Flexible Pressure Transducer For Plastic Machinery
Model : PT124G-111/111T/121/121T
What It's For
PT124G-111/111T/121/121T Series melt pressure transducer is economic type pressure transmitter designed with rigid stem construction. And the model PT124G-111T/121T comes with thermocouple, it can measure the pressure and temperature at one point. This product built in 80% shunt calibration, it can match the N series pressure instrument from ZHYQ, also can match the pressure instrument or controller of other brand. This product has advantage of stability and repeatability, good anti-jamming performance. This series product is widely used in the domestic.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 2mV/V
- Input Voltage : 10VDC
- Repeatability : +/- 0.2%FSO
- Bridge Resistance Input : 345 Ohms minimum
- Bridge Resistance Output : 350 Ohms +/- 10%
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 300 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Temperature sensor (Optional) : J, K, E or PT100
- Electrical connector : 5PIN
- Process connector : M14×1.5, 1/2-20UNF, M18×1.5 Optional
It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
Sanitary Melt Pressure Transducer
Model : PT124G-113/113T/122/122T
What It's For
PT124G-113/113T/122/122T Series sanitary melt pressure transducer designed with rigid stem or flexible stem. The model PT124G-113T/122T comes with thermocouple, which can measure the pressure and temperature at one point. This product filled with environmental, avirulent medium. If the diaphragm damaged during process, the leaking medium is no harm to the human body or ambient. With the advantages of exact and reliable measurement, high performance, no harm, it is widely used in the hygienic field.
- Pressure range : 0-10MPa…0-150MPa (0-1500psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 1.5% FSO; ± 1.0% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 3.33 mV/V, 2mV/V
- Input Voltage : 10VDC
- Repeatability : +/- 0.2%FSO
- Bridge Resistance Input : 345 Ohms minimum
- Bridge Resistance Output : 350 Ohms +/- 10%
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 260 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Electrical connector : 5PIN, 6PIN
- Process connector : 1/2″-20UNF, M14×1.5, M18×1.5 Optional
It has the wide application in medicine & food process equipment, drinking water environmental monitoring and etc.
Explosion Proof Melt Pressure Transducer
Model : PT124G-125/125T
What It's For
PT124G-125/125T Series explosion proof melt pressure transducer adopts intrinsic safety explosion proof and welded construction, it is suitable to use in the harsh environment. PT124G-125T comes with thermocouple, which can measure the pressure and temperature at one point. This product built in 80% shunt calibration, it can match the N series pressure instrument from ZHYQ, and also can match the pressure instrument or controller of other brand.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 0.5% FSO, ± 1.0% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 3.33 mV/V, 2mV/V
- Input Voltage : 10VDC
- Repeatability : +/- 0.2%FSO
- Bridge Resistance Input : 345 Ohms minimum
- Bridge Resistance Output : 350 Ohms +/- 10%
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 350 ℃
- Mounting Torque : 500 inch/lbs. max.
- Explosion proof : ExibllCT4
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Electrical connector : 1/2NPT conduit cable
- Process connector : 1/2 ″ -20UNF, M14×1.5, M18×1.5 Optional
It is widely used in the hazardous area for pressure measurement and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
Capillary Melt Pressure Transducer For Narrow Space
Model : PT124G-128
What It's For
PT124G-128 Series melt pressure transducer is ideal for space restricted areas applications required, where mounting space is limited. It also has a free-spinning jam nut that simplifies installation. It comes equipped with six or eight pin bendix connector, and it can be interchangeable with the similar world standard products.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : 0.5% FSO (Including Linearity, Repeatability&Hysteresis)
- Output : 3.33 mV/V, 2mV/V
- Input Voltage : 10VDC
- Repeatability : +/- 0.2%FSO
- Bridge Resistance Input : 345 Ohms minimum
- Bridge Resistance Output : 350 Ohms +/- 10%
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 350 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Electrical connector : 5PIN, 6PIN
- Process connector : 1/2 ″ -20UNF, M14×1.5, M18×1.5 Optional
It can be used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
