Melt Pressure Gauge
Rigid Stem Melt Pressure Gauge
Model : PT124Y-610
What It's For
The rigid rod melt pressure gauge, adopts the original German packaging machine stamen, dial plate’s step-up and stem-down versions, the gauge head can be rotated 360°for unobstructed viewing.
- Range : 0~16MPa~150MPa
- Accuracy : ±1.6%FS
- Configuration : Bourdon tube
- Over Pressure : 1.5×FS
- Dial Diameter : 100mm
- Needle sweep : 270º
- Diaphragm material : Stainless steel
- Case material : Stainless steel with safety glass
- Max Diaphragm Temp. : 350℃
- Process Connection : 1/2-20UNF, M14*1.5, M22×1.5;M18×1.5,（Optional）
It is widely used in chemical fibre and filature, rubber & plastic machinery, high temperature steam, high temp fluid pressure measurement and control.
Rigid Rod Melt Pressure Gauge With Transmitter Output
Model : PT124Y-612
What It's For
The melt pressure gauge designed with all stainless steel structure, isolated diaphragm and local index display. With dial plate’s step-up and stem-down versions.
- Range : 0~16MPa~150MPa
- Output : 3.33mV/V,4-20mA
- Accuracy : ±1.6%FS
- Configuration : Bourdon tube
- Over Pressure : 1.5×FS
- Dial Diameter : 100mm
- Needle sweep : 270º
- Diaphragm material : Stainless steel
- Case material : Stainless steel with safety glass
- Max Diaphragm Temp. : 350℃
- Process Connection : 1/2-20UNF, M14*1.5, M22×1.5;M18×1.5,（Optional）
- Chemical fiber and filature
- Rubber & plastic machinery
- The equipment of high temperature steam
- High temp fluid pressure measuring and controlling
Electric Contact Melt Pressure Gauge
Model : PT124Y-613
What It's For
The electric contact melt pressure gauge adopts the original packaging machine stamen, comes with signal and electric contact output. It is suitable for pressure automatic control and alarm in industrial automation process.
- Range : 0~100bar~700bar
- Output : Electric contact switch signal 3A
- Accuracy : ±1.6%FS
- Configuration : Bourdon tube
- Over Pressure : 1.5×FS
- Dial Diameter : 100mm
- Needle sweep : 270º
- Diaphragm material : Stainless steel
- Case material : Stainless steel with safety glass
- Max Diaphragm Temp. : 350℃
- Electric connector : Direct cable
- Process Connection : M22×1.5, G1（Optional）
- Chemical fiber and filature
- Rubber & plastic machinery
- The equipment of high temperature steam and polyester
- Pressure measurement and control of polyester fiber, nylon and other special occasions.
Remote Melt Pressure Gauge
Model : PT124Y-614
What It's For
The flexible stem melt pressure gauge, adopts the original packaging machine core, and designed with all stainless steel structure, with dial plate’s step-up and stem-down versions.
- Range : 0~16MPa~150MPa
- Accuracy : ±1.6%FS;
- Configuration : Bourdon tube
- Over Pressure : 1.5×FS
- Dial Diameter : 100mm
- Flexible Length : 0.5…5m
- Case material : Stainless steel with safety glass
- Max Diaphragm Temp. : 350℃
- Process Connector : 1/2″-20UNF, M14×1.5, M18×1.5（Optional）
- Chemical fiber and filature
- Rubber & plastic machinery
- The equipment of high temperature steam
Remote Melt Pressure Gauge With Transmitter Output
Model : PT124Y-615
What It's For
The series flexible stem melt pressure gauge adopts the original packaging machine stamen, and designed with all stainless steel structure, isolated diaphragm and local index display. PT124Y-615T equipped with thermocouple, it can measure the pressure and temperature at one point.
- Range : 0~16MPa~150MPa
- Output : 4-20mA; 3.33mV/V optional
- Accuracy : ±1.6%FS;
- Input Voltage : 24VDC (12~36)VDC; 10VDC
- Configuration : Bourdon tube
- Over Pressure : 1.5×FS
- Dial Diameter : 100mm
- Flexible Length : 0.5…5m
- Electronic Connector : 6PIN
- Temperature type : J, K, E optional
- Case mterial : Stainless steel with safety glass
- Max Diaphragm Temp. : 350℃
- Process Connector : 1/2″-20UNF, M14×1.5, M18×1.5（Optional）
- Chemical fiber and filature
- Rubber & plastic machinery
- The equipment of high temperature steam
Electric Contact Melt Pressure Gauge
Model : PT124Y-616
What It's For
PT124Y-616 adopts the original packaging machine stamen with signal and electric contact output, and designed with all stainless steel structure, isolated diaphragm and local index display. With dial plate’s stem-up and stem-down versions, the gauge head can be rotated 360°for unobstructed viewing.
- Range : 0….10MPa to 0….150MPa
- Output : Contact switch signal
- Accuracy : ±1.6%FS
- Input Voltage : 24VDC (12~36)VDC; 200VAC ;380VAC
- Configuration : Bourdon tube
- Over Pressure : 1.5×FS
- Max Diaphragm Temperature : 350℃
- Dial Diameter : 100mm
- Flexible Length : 0.5…5M
- Electric connector : Direct cable
- Process connector : M22*1.5 , G3/4（customer tailor）
- Electric connector : 5 pins , DIN , gland leading
- Wiring diaphragm : Red / yellow for NO ; Red/blue for NC
- Chemical fiber and filature
- Rubber & plastic machinery
- The equipment of high temperature steam
