Test Block

Rubber Test Blocks according to MACRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually.

Different MACRO IRHD ranges are available : 30, 40, 50, 60, 70, 80, 90

The mean value, range and standard deviation are displayed on the test report.
The Rubber Test Blocks are provided with a Calibration Certificate issued by Hildebrand Prüf- und Messtechnik GmbH.

Rubber Test Blocks according to MICRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually.

Different MICRO IRHD ranges are available:

40, 50, 60, 70, 80, 90

The mean value, range and standard deviation are displayed on the test report.
The Rubber Test Blocks are provided with a Calibration Certificate issued by Hildebrand Prüf- und Messtechnik GmbH.

This kit will prove to be invaluable in helping to maintain durometer read-out accuracy for science, manufacturing, research and development. The test kit consists of 7 Test blocks. The individual test blocks are provided with serial numbers to guarantee incontestable identification.

The hardness values are ranging from 30 durometer to 90
durometer Type A. As a reference check, it will indicate if a durometer is operating within tolerances. A durometer should never be calibrated with test blocks. For durometer calibration we recommend our Durometer Calibrator. The material from which the test blocks are made is fairly stable, however, it is strongly recommended that the calibration of the test blocks be verified annually.

• 7 test blocks size approx.
  48 mm x 48 mm x 8 mm

Three test blocks with hardness values of approx. 60, 75 and 85 Type D are available for testing durometer Type D. An annual calibration of the test block is strongly recommended.

• One Test Block approx. DIA. 50 mm x 9.5 mm
• Custom made carrying case

Five test blocks with hardness values of approx. 10, 20, 40, 65 and 90 Type D are available for testing durometer Type D. An annual calibration of the test block is strongly recommended.

• Size for Test Blocks 10, 20 and 40 Typ D:
  approx. 48 mm x 48 mm x 8 mm
• Size for Test Blocks 65 and 90 Typ D:
  approx. DIA. 50 mm x 9.5 mm
• Custom made carrying case

Three test blocks with hardness values of approx. 30, 50 and 80 Type OO are available for testing durometer Type OO. An annual calibration of the test block is strongly recommended.

• One Test Block approx. DIA. 54 mm x 15 mm
• Custom made carrying case

BAM Standard reference compound sheet according to ISO 4649 Annex B.2
Standard reference compound No. 1.

Dimensions:
8 mm x 181 mm x 181 mm, 365 g.