What It's For
The MICRO IRHD SYSTEM is a hardness testing machine controlled by a Hildebrand MS-Windows software. 2 weights are automatically lowered and raised. Thus this system eliminates operator errors while testing.
- Dimensions IRHD unit : Ø 200 mm x 470 mm
- Controller : 290 mm x 260 mm x 75 mm
- Net weight: 17,5 kg
- Max. sample thickness: 90 mm (without Center Device)
- Resolution: 0,1 IRHD
- Standards : DIN ISO 48, ISO 48, ASTM D 1415, BS 903: Part A26
- Test Blocks MICRO
- O-Ring Center Device
- Center Device with sample holder
- X-Table Center Device
- Prism Center Device
- Plattform for IRHD
What It's For
Durometer Hardness System provides hardness readings on elastomers and plastics with a specimen thicker than 6 mm according to IRHD and Durometer hardness. It complies to international standards DIN ISO 48, ISO 48, ASTM D 1415 and DIN 53505.
Available inserts for IRHD:
Ball 2,5 mm (IRHD N)
Ball 5,0 mm (IRHD L)
Ball 1,0 mm (IRHD H)
Insert Durometer A
Available inserts for IRHD:
Ball 2,5 mm (IRHD N)
Ball 5,0 mm (IRHD L)
Ball 1,0 mm (IRHD H)
Insert Durometer A
- Dimensions IRHD unit : Ø 200 mm x 470 mm
- Controller : 290 mm x 260 mm x 75mm
- Net weight : 17,5 kg
- Resolution : 0,1 IRHD
- Standards : DIN ISO 48, ISO 48, ASTM D 1415
- Test Blocks MACRO IRHD
- X-Table Center Device
- Prism Center Device
- Plattform for IRHD
Center Device
What It's For
The patented O-Ring Center Device fully automatically cooperates with the MICRO IRHD SYSTEM. O-Rings with a cord dia. of 0.6 mm to 8 mm will just be placed on the measuring table and pushed to the positioning pin. The cord dia. is keyed into the MICRO IRHD software. Integrated electric motors are exactly driving the measuring table to the measuring axis. This results in measuring the highest position of the O-ring.
- System enables exact measuring at the measuring axis i.e. the highest point of the ORing, see fig. 4
- O-Ring cord dia. 0.6 mm to 8 mm, adjustable steps of 0.01 mm
- Fully automatic measuring cycle
- While measuring the pin is in rest position (in), the O-Ring is lying freely on the measuring table, no lateral influences
- Easy to operate
- Reference position of the measuring table
What It's For
The Center Device with sample holder fully automatically cooperates with the MICRO IRHD SYSTEM. This fixture is designed to measure O-Rings and round style parts.
For each sample you need a sample holder.
Each sample holder has an identification number. The identification number is keyed into the MICRO IRHD software. An integrated electric motor is driving the measuring table to the exact position of the measuring axis. The machine is now measuring the sample. After the first measuring the sample holder can be rotated to measure at a different spot.
For each sample you need a sample holder.
Each sample holder has an identification number. The identification number is keyed into the MICRO IRHD software. An integrated electric motor is driving the measuring table to the exact position of the measuring axis. The machine is now measuring the sample. After the first measuring the sample holder can be rotated to measure at a different spot.
- System enables exact measuring at the measuring axis i.e. the highest point of the sample
- Measuring table movement: 27 mm
- Custom designed sample holders are available
- Measuring table dimensions: 84 mm x 150 mm
- Fully automatic measuring cycle
- Easy to operate
- Reference position of the measuring table
What It's For
X-Table Center device with digital gauge is cooperating with the MICRO IRHD SYSTEM. This fixture is designed to measure small irregular parts. Two straight pins are used as rest positions for the sample. The sample can be easily fixed with modelling clay. The digital gauge enables exact measuring at the measuring axis i.e. the highest point of the sample.
- Digital gauge :
Measuring range : 0...25 mm, Functions: On/OFF, mm/inch, HOLD, PRESET, Resolution: 0.001 mm - Standard sample holder :
Exterior dia. : 50 mm
Matrix 5 mm x 5 mm, 60 holes dia. 2H7,
2 straight pins included - Custom designed sample holders are available
- Connecting hole in base for sample holder: 8H7
- Sample holder is fixed with a straight pin preventing any rotation
What It's For
The Prism Center Device is designed to measure hoses and cables. It is cooperating with:
- Micro IRHD System
- IRHD N, H, L / Durometer Hardness Ssystem
- Durometer Operating Stands
- Fixture enables exact measuring at the measuring axis
- i.e. the highest point of the sample
- Exterior dia. of sample: 4.....50 mm
- without adjusting devices
- Center prism removeable to measure bigger parts
- Easy to operate
What It's For
This platform can be clamped onto the IRHD support table by means of three screws - without using any tools.
The larger platform allows testing of larger samples.
The larger platform allows testing of larger samples.
- Dimensions: 250 mm x 200 mm x 10 mm
- Net Weight: 1,2 kg
Durometer
What It's For
Durometer Model HD3000 is our standard model. The gauge features a full-sized non-reflective dial face for readability accuracy of 1/2 point. The durometer conforms to DIN ISO 7619, ISO 868, ISO 7619 and ASTM D 2240. Model HD3000 offers maximum accuracy available in a dial model gauge at minimum cost.
- Conform to DIN, ISO and ASTM
- Drag pointer available
- Large dial surface
- Full 360° dial
- Superior 1/2 point accuracy
- Ergonomic handhold design
What It's For
Type 1:
Slim Probe 1, foot DIA. 8 mm for hard to reach areas or irregular shapes.
Type 2:
Chisel shaped (angled foot) for hard to reach or narrow areas.
Type 3:
Slim Probe 2, DIA. 5.0 mm. A thinner foot for reaching hard to get places or irregular shapes. Custom designed durometers conform to the Hildebrand Company standard.
Slim Probe 1, foot DIA. 8 mm for hard to reach areas or irregular shapes.
Type 2:
Chisel shaped (angled foot) for hard to reach or narrow areas.
Type 3:
Slim Probe 2, DIA. 5.0 mm. A thinner foot for reaching hard to get places or irregular shapes. Custom designed durometers conform to the Hildebrand Company standard.
- Dial diameter: 57 mm
- Total length: 166 mm
- Net weight: 0,238 kg
- Range: 0....100
- Accuracy: ±0,5
- Resolution: 1
- Drag pointer: Optionl
- Available types: A, D
What It's For
The Hildebrand Digital Durometer Model HDD-2 is our latest innovation for checking the hardness of rubber, plastics and other non-metallic surfaces. The durometer conforms to DIN ISO 7619, ISO 868, ISO 7619 and ASTM D 2240.
- Conform to DIN, ISO and ASTM
- Superior 1/2 point accuracy
- Ergonomic handhold design
- Large LCD
- Time set-up from 1...99 s
- Resolution 0.1
- AUTO-OFF-function
- HOLD-function
- Low battery warning
- Data port: Opto-RS 232
- Connected directly to your PC for data transfer to Hildebrand HilMeasure Software
- Batteries 3.6 V Size 1/2 AA
What It's For
The new HilMeasure Software is available for the following Hildebrand products:
The HilMeasure Software is the ideal tool for laboratory applications and documentation.
- Digital Durometer HDD-2
- Thickness measuring instruments for:
- Rubber, Textiles, Films and foils
- Ball rebound tester
- Densimeter H-300S
The HilMeasure Software is the ideal tool for laboratory applications and documentation.
- Windows7® compatible
- Analogue/digital measurement display
- Comprehensive statistics
- Configurable test report (pdf)
- Output files as .csv or.jpg
- Various HMI languages can be set
- Individual licenses for the above mentioned products
- Configurable HMI
- Pre-configurable user profile
- Automatic instrument detection
