Melt Pressure Transmitter
Cost-Effective Melt Pressure Transducer
Model : PT124B-111/ 111T/121/121T
What It's For
PT124B-111/ 111T/121/121T Series melt pressure transducer is economic type, designed with rigid stem construction. And the model PT124B-111T comes with thermocouple, it can measure the pressure and temperature at one point. This product built in amplifier circuit board and 80% shunt calibration, zero and span adjustable, the output signal can input PLC directly. And it can match the N series pressure instrument from ZHYQ, also can match the pressure instrument or controller of other brand.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 1.5% FSO; ±1.0% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 4-20mA, 0-10V, 0-5V
- Input Voltage : 24VDC
- Repeatability : +/- 0.2%FSO
- Bridge Resistance : Input 345 Ohms minimum
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 300 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Thermocouple type : J, K, E, PT100 (PT124B-111T, PT124B-121T)
- Electrical connector : 5PIN
- Process connector : M14×1.5, M18×1.5 Optional
It can be widely used in various plastic extrusion lines for pressure measuring and control, such as meltblown nonwoven, chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
High Accuracy Extrusion Pressure Transducer Melt Pressure Sensor
Model : PT124B-112/112T/123/123T
What It's For
PT124G-111/111T/121/121T Series melt pressure transducer is economic type pressure transmitter designed with rigid stem construction. And the model PT124G-111T/121T comes with thermocouple, it can measure the pressure and temperature at one point. This product built in 80% shunt calibration, it can match the N series pressure instrument from ZHYQ, also can match the pressure instrument or controller of other brand. This product has advantage of stability and repeatability, good anti-jamming performance. This series product is widely used in the domestic.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 2mV/V
- Input Voltage : 10VDC
- Repeatability : +/- 0.2%FSO
- Bridge Resistance Input : 345 Ohms minimum
- Bridge Resistance Output : 350 Ohms +/- 10%
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 300 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Temperature sensor (Optional) : J, K, E or PT100
- Electrical connector : 5PIN
- Process connector : M14×1.5, 1/2-20UNF, M18×1.5 Optional
It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
Sanitary Melt Pressure Transmitter
Model : PT124B-113/113T/122/122T
What It's For
PT124B-113/113T/122/122T Series sanitary melt pressure transmitter, it designed with rigid or flexible stem. And PT124B-113T comes with thermocouple, which can measure the pressure and temperature at one point. This product filled with environmental, avirulent medium. If the diaphragm damaged during process, the leaking medium is no harm to the human body or ambient. With the advantages of exact and reliable measurement, high performance, no harm, t is widely used in the hygienic field.
- Pressure range : 0-10MPa…0-150MPa (0-1500psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 1.5% FSO; ± 1.0% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 4-20mA, 0-10V, 0-5V
- Input Voltage : 24VDC
- Repeatability : +/- 0.2%FSO
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 260 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Electrical connector : 5PIN, 6PIN
- Process connector : 1/2″-20UNF, M14×1.5, M18×1.5 Optional
It has the wide application in medicine & food process equipment, drinking water environmental monitoring and etc.
Explosion Proof Melt Pressure Transmitter
Model : PT124B-125/125T
What It's For
PT124B-125/125T Series explosion proof melt pressure transmitter suitable for plastic extruder machinery ,adopts intrinsic safety explosion proof and welded construction, it is suitable to use in the harsh environment. PT124B-125T comes with thermocouple, which can measure the pressure and temperature at one point. The series pressure transmitter has advantage of stability and repeatability, good anti-jamming performance.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ±0.5% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 4-20mA, 0-10V, 0-5V
- Input Voltage : 24VDC
- Repeatability : +/- 0.2%FSO
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 400 ℃
- Mounting Torque : 500 inch/lbs. max.
- Explosion proof : ExibllCT4
- Electrical connector : 1/2NPT conduit cable
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Process connector : 1/2 ″ -20UNF, M14×1.5, M18×1.5 Optional
It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
Flange Mounting Melt Pressure Transducer
Model : PT124B-126
What It's For
PT124G-126 Series flexible type flange melt pressure transmitter adopts special material and elastic alloy diaphragm, it reduced the drift of the transducer and improve the accuracy. It designed with exclusive flange structure, increase the force bearing area, it is the ideal choices for the low pressure measurement field. The series pressure transmitters has advantage of stability and repeatability, good anti-jamming performance, it can be interchangeable with the similar world standard products.
- Pressure range : 0-1MPa…0-150MPa (0-150psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 0. 5% FSO; ± 0.25% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 4-20mA, 0-10V, 0-5V
- Input Voltage : 24VDC
- Repeatability : +/- 0.2%FSO
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 400 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Process connector : Flange mounting
It has wide application of pressure measurement & control for melt-temp liquid for chemical and fiber equipment, polyester equipment and etc.
Restricted Area Melt Pressure Transmitter
Model : PT124B-128
What It's For
PT124B-128 Series capillary flush diaphragm melt pressure transmitter is ideal for space restricted areas applications required, where mounting space is limited. It also has a free-spinning jam nut that simplifies installation. It comes equipped with six or eight pin bendix connector. This series product is widely used in the domestic and abroad, and it can be interchangeable with the similar world standard products.
- Pressure range : 0-3.5MPa…0-150MPa (0-500psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ±0.5% FSO (Including Linearity,Repeatability&Hysteresis)
- Output : 4-20mA, 0-10V, 0-5V
- Input Voltage : 24VDC
- Repeatability : +/- 0.2%FSO
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 350 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Process connector : 1/2 ″ -20UNF, M14×1.5, M18×1.5 Optional
It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
LCD Local Display Flexible Melt Pressure Transmitter
Model : PT124B-129/129T
What It's For
PT124B-129/129T Series smart melt pressure transmitter, designed with flexible stem construction. It adopts LCD display indicator, built in programmable amplifier electrical circuit, output 2-wire 4-20mA signal, and HART protocol optional, to realize remote control. And PT124B-129T adds thermocouple, it can measure and control the pressure and temperature at one point.
- Pressure range : 0-2MPa…0-150MPa (0-300psi…0-20000psi)
- Over Pressure : 1.5 X FSO
- Combined Error : ± 0. 5% FSO (Including Linearity, Repeatability & Hysteresis)
- Output : 4-20mA (HART)
- Input Voltage : 24VDC
- Repeatability : +/- 0.2%FSO
- Internal Shunt Calibration (R-Cal) : 80% FSO +/- 1%
- Insulation Resistance : 200 megohms @ 100 Vdc
- Max Diaphragm Temperature : 350 ℃
- Mounting Torque : 500 inch/lbs. max.
- Standard Wetted Parts : Diaphragm coated 15-5 PH SST
- Electrical connector : Terminal cable
- Process connector : 1/2 ″ -20UNF, M14×1.5, M18×1.5 Optional
It has the wide application in plastic extrusion, chemical & fiber industry, polyester industry, etc.
