Teclock Innovative Measuring

In the production site that you need to check the dimensional accuracy, dial gauge has been always used.

Scale interval (1 scale), depending on the intended use, are 0.0005mm, 0.001mm, 0.005mm, 0.01mm, 0.05mm, 0.1mm, 6 kinds exhaustive. The measurement range is from a minimum 0.08mm to 150mm. The dial gauge is usually not used alone, to secure the stem portion / rear part on a jig. Work is sandwiched between the measuring table and measuring element, it reads the amount of displacement in the short hand and minute hand. Its application are direct measurement to be measured by the actual dimensions, and comparative measurement to read the amount of displacement from the phrase reference dimension.

Other dimensions and parallelism-centering of the workpiece, deflection measurement of the rotation axis and turning of the machine, parallel out of the table surface of the machine. Its applications are many and diverse. Its features is that sensitivity is good for the fine size displacement compared to standard dial gauge. Since the leg-like measuring element has a tip sphere, it can be measured in a narrow portion where a tip (standard φ2mm ultra hard ball) enters. The gauge head is provided in φ0.6mm, φ0.8mm, φ1.0mm in addition to the standard.

In the production site that you need to check the dimensional accuracy, dial gauge has been always used.

Scale interval (1 scale), depending on the intended use, are 0.0005mm, 0.001mm, 0.005mm, 0.01mm, 0.05mm, 0.1mm, 6 kinds exhaustive. The measurement range is from a minimum 0.08mm to 150mm. The dial gauge is usually not used alone, to secure the stem portion / rear part on a jig. Work is sandwiched between the measuring table and measuring element, it reads the amount of displacement in the short hand and minute hand. Its application are direct measurement to be measured by the actual dimensions, and comparative measurement to read the amount of displacement from the phrase reference dimension.

It is a dedicated instrument for measuring the difference in level and depth of the work piece in handy. The bottom surface of the base is brought into close contact with the measurement origin (zero point). Then the outer frame by rotating to align the zero position (to secure the outer frame by a clamp at that time). The amount that the probe was protruding from its position is read by the hour hand and minute hand. There are two types of analog and digital. Shape and the base of the size of the probe is also supported by the application. In response to the depth of the measurement section, stroke has each standard model of 10mm / 20mm / 30mm. To attach the connecting legs, you can compare and measure the depth of up to 220 ~ 240 mm by performing a reference point alignment using a block gauge.

Inside caliper gauge IM-880 series sets the distance between the measuring element facing outward to the standard size by ring gauge or micrometer at first. After the scale of interlocking scale plate matched to the zero point by turning the outer frame, inserted to measure the gauge head portion to the inner diameter portion to be measured. Read the amount of displacement of the guidelines from the zero point of the scale of that time. A displacement amount that has been read to the reference size plus or minus value is the dimensions of the inner diameter. The series comes with alternate measuring element that can be set exact dimensions depending on the magnitude of the inner diameter.
Conversely, the outer caliper gauge reads the value across the workpiece at two measuring element facing inwardly.

It is the base stand that allows precise measurement of the workpiece size only by attaching a dial gauge or digital indicator. Natural stone (micro granite) base is workpiece-smooth by fine-grained organization, and is stable and high degree of flatness within 0.001mm / 200mm. Please select from the extensive line-up such as the base of the size and the fine movement apparatus.

Durometer (rubber, plastic hardness tester) represents to quantify the degree of hardness of soft materials such as rubber. Now, there is a large revision to JIS standard and ISO standard, way of details and hardness measurement of rubber hardness tester has been some changes. As a comprehensive manufacturer of soft material hardness measuring instrument, as well as rubber and plastics, we will propose the hardness measurement method of a number of soft material and elastic body.

GX-02 is an automatic rubber hardness measurement system. It carried out in defined operating speed, measurements mass and pressure face dimensions by JIS K 6253 Rubber, vulcanized or thermoplastic - How to find hardness.

Automatic hardness measurement by the motor drive.
Easy operation with easy-to-read touch panel.
It allows two types of measurement of the maximum value and the timer value.
Compact integrated.
New JIS ISO-compliant.
With sensor replacement and optional weight, A, D and E can be measured by single equipment

Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.

By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.