Memmert

Whatever you want to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin or heating plasticine. The Memmert U universal heating oven / drying oven stands for unparalleled precise, even and gentle temperature control.

• Temperature range up to +300 °C
• 9 model sizes (32 to 1060 litres volume)
• 2 model variants: SingleDISPLAY and TwinDISPLAY
• Natural convection or forced air circulation N/F

What is hot air sterilisation? Steriliser S makes use of dry sterilisation to ensure laboratory equipment and devices are sterilized. With this method, hot air, devoid of water vapor or moisture, makes sure the device is sterile without needing risk prone disinfection methods. Each Memmert hot air steriliser S is classified as class IIb medical device. Memmert is bringing medical devices of class IIb into circulation according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).

• Hot air sterilisation temperature range up to +250 °C
• 8 model sizes (32 to 749 liters volume) to heat sterilize as needed
• 2 model variants: SingleDISPLAY and TwinDISPLAY
• Natural convection or forced air circulation N/F

If you want to minimise contamination when transporting samples or components, the advantages of the UF TS are just what you need. Thanks to its easy-to-clean interior, fast recovery times after opening the door as well as homogeneous temperature distribution, this oven is the perfect material lock between the grey room and the cleanroom in the electronics and semiconductor, medicine or pharmaceutics industry. The pass-through oven UF TS is based on the Memmert standard heating oven UFplus and it features all required technological highlights like product specific heating and perfectly adapted control technology. The top configuration with TwinDISPLAY ensures precision and thermal safety, especially when working in the cleanroom. However, as these units have to be adapted to meet users' specific demands, please get in contact with our experts for individual solutions us. We will find the optimum solution for your application.

• temperature range up to +250 °C
• 4 model sizes (161 to 749 litres volume)
• 1 model variant: TwinDISPLAY
• forced air circulation F

Five model sizes, for high-precision temperature control of the embedding medium, such as paraffin or wax. The range of functions and thermal safety of the Memmert paraffin oven UNpa are designed specifically for an absolutely reliable sample preparation in histology, forensics or microbiology. Your benefits? An optimum cost/benefit ratio for an appliance that guarantees, for many years, precise and even warming of the embedding medium without any loss in quality whatsoever.

• 5 model sizes (32 to 161 litres volume)
• Temperature range +30 °C to +80 °C
• Model variant: TwinDISPLAY
• High degree of thermal safety through multiple overtemperature protection
• No feed or exhaust air, therefore an almost gas-tight chamber

Five model sizes, for high-precision temperature control of the embedding medium, such as paraffin or wax. The range of functions and thermal safety of the Memmert paraffin oven UNpa are designed specifically for an absolutely reliable sample preparation in histology, forensics or microbiology. Your benefits? An optimum cost/benefit ratio for an appliance that guarantees, for many years, precise and even warming of the embedding medium without any loss in quality whatsoever.

• 5 model sizes (32 to 161 litres volume)
• Temperature range +30 °C to +80 °C
• Model variant: TwinDISPLAY
• High degree of thermal safety through multiple overtemperature protection
• No feed or exhaust air, therefore an almost gas-tight chamber

Reliable, comfortable and energy-efficient - that’s how vacuum drying works today. Separately adjustable and directly heated thermoshelves ensure precise temperature control and, thanks to the digital pressure control, the chamber load is not only dried at high speed but also extremely gently in our powerful and robust vacuum drying oven. Together with the speed-controlled vacuum pump, the vacuum oven VO forms an unbeatably energy-efficient duo. The pump is perfectly tidied away in the matching base cabinet.

• Temperature range up to +200 °C
• Vacuum control range: 5 to 1100 mbar
• 3 model sizes (29 to 101 litres volume)
• 1 model variant: TwinDISPLAY
• Anti-splinter; VDE-tested door construction for all models
• Pump control: Optimised rinsing of the pump membrane as well as signal output for switching the pump ON/OFF according to requirements.
• Optional: Pump base cabinet and energy-efficient vacuum pump

Low-temperature vacuum drying enables pharmaceutical or food labs to gently dry bacteria and starter cultures in the cooled vacuum oven VOcool. Furthermore, programme-controlled storage and transport scenarios, for determining the behaviour of active ingredients or volumes at different pressure and temperature conditions, can be simulated.

• Temperature range +5 up to +90 ℃
• 2 model sizes (29 and 49 litres volume)
• 1 model variant: TwinDISPLAY

In the laboratory, the Memmert incubator I is ideal for all applications with temperatures up to +80°C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.

• temperature range up to +80 °C
• 8 model sizes (32 to 749 litres volume)
• 2 model variants: SingleDISPLAY and TwinDISPLAY
• natural convection or forced air circulation N/F
• double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature
• activation of sterilisation routine via ControlCOCKPIT (TwinDISPLAY)

he control system of the Memmert CO2 incubator ICOmed is so finely tuned that the appliance reaches the setpoint temperature very quickly and without temperature overshoots. Alarm notifications to your mobile phone guarantee the safety of the chamber load, and the battery-buffered ControlCOCKPIT ensures continuous CO2 control even when there is a power failure. Ideal hygiene is a given too: rounded edges enable easy and thorough cleaning, the interior can be sterilised within 60 minutes at 180 °C.

• 4 model sizes (with a chamber volume of 56 to 241 litres)
• Temperature range +18 °C to +50 °C
• Setting range CO2 0 to 20 % CO2
• Setting range 02 1 to 20 % O2
• Setting range active humidity control (with option K7) 40 to 97 and rh-off
• Fail-safe, FDA-compliant logging of temperature, CO2, O2 humidity, open door time data
• Battery-buffered ControlCOCKPIT: The operating display, logging and CO2 control are fully functional even during a power failure
• Visual and acoustic alarm as well as alarm notification to mobile phones if the individually adjustable temperature, CO2, O2, or humidity ranges are exceeded
• Active humidity control
• The interior chamber, including all installations and sensors, can be sterilised at +180 °C in a 60-minute programme

This environmentally-friendly incubator is cooled with climate-friendly CO2. Thanks to the excellent thermodynamic properties of the refrigerant CO2 (R124a) and the finely adjusted control technology, the ICP cooled incubator is both powerful and high-precision. Without critical temperature overshoots, it keeps the temperatures exactly at the setpoint.

• temperature range -12 °C up to +60 °C
• 4 model sizes (108 to 749 litres volume)
• 1 model variant: TwinDISPLAY
• double doors standard for all models: Prevention of contamination and drops in temperature, and at the same time an optimum view of the sensitive load through wide-area interior glass doors
• very good air circulation in the working chamber through sophisticated ventilation technology
• intelligent defrosting function

Powered by the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and, simultaneously, the most powerful cooled incubator of its kind. Compared to similar appliances, its heat-up, cool down and recovery times are much shorter. The Peltier-cooled incubator from Memmert saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient. Common applications are microbiological analyses, bacterial count determination, cultivation above & below room temperature, beer stability accelerated aging test, or shelf life tests of dairy products.

• Temperature range 0°C up to +70 °C
• 9 model sizes (32 to 2140 litres volume)
• 2 model variants: SingleDISPLAY and TwinDISPLAY
• Double doors as standard with fully insulated stainless steel. Inside glass: prevention of contamination and drops or rises in temperature. Furthermore, an optimal view of the sensitive load through wide-area Interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves) are possible.
• Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distribution

This powerful climate chamber with Advanced Peltier Technology has more than earned the 'eco’ epithet. In continuous operation, it works around 90% more energy efficiently than compressor-cooled devices, does not require any refrigerant and is therefore nearly maintenance-free. The temperature control from +0 °C to +70 °C as well as the active humidification and dehumidification from 10% to 90% rh in the HPPeco are optimally tailored to the requirements of stability tests in pharmaceutical industry (Q1A). Due to its quiet operation the compact constant climate chamber is also suitable for breeding insects or zebra fish.

• Temperature range from +0 °C up to +70 °C
• 7 model sizes (108 to 2140 litres volume)
• 1 model variant: TwinDISPLAY
• Digitally controlled active humidification and dehumidification up to 90% rh
• double doors as standard with fully insulated stainless steel. Inside glass: prevention of contamination and drops or rises in temperature.
• An optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves) are possible.

This climate chamber offers the full range of comfort, reliability, and safety. It has active humidity control set from 20 % to 95 % rh and an unsurpassed homogeneity of temperature and humidity over the entire interior. It is suited for environmental testing, environmental simulation, accelerated service life tests, and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.

• Temperature range up to +90 °C
• 4 model sizes (56 to 241 litres volume)
• 1 model variant: TwinDISPLAY
• Active humidity control 20 to 95 % rh
• Double doors as standard:
• 1. Prevention of contamination
• 2. Prevention of drops or rises in temperature
• 3. An optimal view of the sensitive chamber load through wide-area heated inner glass door

This climate chamber offers the full range of comfort, reliability, and safety. It has active humidity control set from 20 % to 95 % rh and an unsurpassed homogeneity of temperature and humidity over the entire interior. It is suited for environmental testing, environmental simulation, accelerated service life tests, and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.

• Temperature range up to +90 °C
• 4 model sizes (56 to 241 litres volume)
• 1 model variant: TwinDISPLAY
• Active humidity control 20 to 95 % rh
• Double doors as standard:
• 1. Prevention of contamination
• 2. Prevention of drops or rises in temperature
• 3. An optimal view of the sensitive chamber load through wide-area heated inner glass door

Rapid, precise and energy-saving temperature changes in the range from -42 ºC to +190 ºC, along with fast humidity recovery times, make the TTC temperature test chamber and the CTC climatic test chamber with humidity unit a perfect duo for controlled material testing, function tests, ageing tests or climate tests on composites, concrete, plastics or electronic components in material technology, the automotive and aerospace industries, and electronics.

• 1 model size (256 litres volume)
• long-standing proven control technology
• electronically controlled active humidification and dehumidification from 10 % to 98 % rh
• specifically suited for tests in accordance with IEC 60068
• high-tech insulation system for permanent insulation capacity and energy efficiency
• temperature change rate in heating operation according to IEC 60068-3-5: 10 K/min (-40 °C to +180 °C; measured at an ambient temperature of 22 °C)
• temperature change rate in cooling operation according to IEC 60068-3-5: 3 K/min (from +180 °C to -40 °C; measured at an ambient temperature of 22 °C)
• refrigerant R449A