Test Blocks Macro IRHD
Rubber Test Blocks according to MACRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually.
Different MACRO IRHD ranges are available : 30, 40, 50, 60, 70, 80, 90
Test Block
Test blocks Micro IRHD
Rubber Test Blocks according to MICRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually.
Different MICRO IRHD ranges are available : 40, 50, 60, 70, 80, 90
Test Blocks Durometer
This kit will prove to be invaluable in helping to maintain durometer read-out accuracy for science, manufacturing, research and development. The test kit consists of 7 Test blocks. The individual test blocks are provided with serial numbers to guarantee incontestable identification.
Three test blocks with hardness values of approx. 60, 75 and 85 Type D are available for testing durometer Type D. An annual calibration of the test block is strongly recommended.
Five test blocks with hardness values of approx. 10, 20, 40, 65 and 90 Type D are available for testing durometer Type D. An annual calibration of the test block is strongly recommended.
Three test blocks with hardness values of approx. 30, 50 and 80 Type OO are available for testing durometer Type OO. An annual calibration of the test block is strongly recommended.
BAM Standard reference compound sheet
BAM Standard reference compound sheet according to ISO 4649 Annex B.2
Standard reference compound No. 1.
Dimensions:
8 mm x 181 mm x 181 mm, 365 g.