Ball Rebound Tester

Measuring cycle, values, time, Median value in % and “what to do” are displayed on the LCD, no calibration necessary, USB-portASTM D 3574.Max. sample thickness: 160 mmThe Ball Rebound Tester is suitable for the determination of the resilience by a ball rebound on foam materials according to DIN EN ISO 8307 and Ball Rebound Tester

Micro IRHD Tester

Available inserts for IRHD:Durometer Hardness System provides hardness readings on elastomers and plastics with a specimen thicker than 6 mm according to IRHD and Durometer hardness. It complies to international standards DIN ISO 48, ISO 48, ASTM D 1415 and DIN 53505. MACRO IRHD SYSTEM

Insert Durometer
Ball 1,0 mm (IRHD H)
Ball 5,0 mm (IRHD L)
Ball 2,5 mm (IRHD N)
Insert Durometer A

The MICRO IRHD SYSTEM provides hardness readings on elastomers according to MICRO IHRD. Recommended specimen thickness is 1 to 5 mm. It complies to international standards such as ISO 48 and ASTM D 1415. The MICRO IRHD SYSTEM is a hardness testing machine controlled by a Hildebrand MSWindows software.

Rubber Test Blocks according to MICRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually.
Different MICRO IRHD ranges are available: 40, 50, 60, 70, 80, 90

Test Blocks for Durometer A  The test kit consists of 7 test blocks.
The individual test blocks are provided with serial numbers to guarantee incontestable identification.
The hardness values are ranging from 30 durometer to 90 durometer type A

Test Blocks for Durometer D 
Three test blocks with hardness values of approx. 60, 75 and 85 type D are available for testing durometer type D.

An annual calibration of the test block is strongly recommended.
- One Test Block approx. DIA. 51 mm x 9.5 mm
- Custom made carrying case

Test Blocks for Durometer OO 
Three test blocks with hardness values of approx. 35, 60 and 80 type OO are available for testing durometer type OO.

An annual calibration of the test block is strongly recommended.
- One Test Block approx. 50 mm x 50 mm x 8 mm
- Custom made carrying case

The patented O-Ring Center Device fully automatically cooperates with the MICRO IRHD SYSTEM. O-Rings with a cord dia. of 0.8 mm to 8 mm will just be placed on the measuring table and pushed to the positioning pin. The cord dia. Is keyed into the MICRO IRHD software.

The Center Device with sample holder fully automatically cooperates with the MICRO IRHD SYSTEM. This fixture is designed to measure O-Rings and round style parts

The Prism Center Device is designed to measure hoses and cables. It is cooperating with:
-MICRO IRHD SYSTEM
-IRHD N, H, L / DUROMETER HARDNESS

Automatic system for Durometer hardness testing

Model OS-3 and the operating panel DuroLifter for DUROMETER TYPES A, AO, D, B, C, DO, O

Thickness Gauge HTG A
Laboratory grade granite base: Ø200 mm x 40 mm
Column diameter: 30 mm (stainless steel)
Resolution: 0,001 mm
Weight: approx. 7 kg
Measuring way 12,5 mm

Thickness Gauge for Film and Foils Model HTG-2 
Standard - ISO 4593 and DIN 53370

- Laboratory grade granite base: Ø200 mm x 40 mm
- Column diameter: 30 mm (stainless steel)
- Sturdy extention arm (stainless steel)
- Individual serial number on the weight/foot
- Measuring way: 0,8 / 1,8 mm according to resolution
- Weight: approx. 6 kg

Thickness Gauge HTG C  

- Laboratory grade granite base: Ø200 mm x 40 mm
- Column diameter: 30 mm (stainless steel)
- Sturdy extention arm (aluminium)
- Manual lever for up and down movement of weight and foot
- Ball bearings enables low friction
- Individual serial number on the weight/foot
- Resolution: 0.001 mm
- Weight: approx. 8 kg

Durometer Calibrator                                                                                                                                              

to check the forces on durometers - was designed according to ISO 18898.
You can check all Durometer Types according to DIN, ISO, ASTM, JIS etc.

The Durometer Calibration Device consists of:
   - a base with spirit level
   - a sturdy column with arm
   - a height adjustment
   - a Durometer support
   - an electronic balance