Since 1993 Hildebrand develop, produce and distribute Hardness Testers for elastomers, plastics and non-metallic materials. Additional test equipment e.g. Tihckness Gauges and Densimeters complete our product range.
We produce - with our high skilled employees - in our facility in Oberboihingen. To ensure the high quality of our products, we make tests in our climate-controlled quality assurance room for the hardness of "Shore and IRHD". Our measuring devices in our quality assurance room fully corresponds to national and international standards.
NEW product
|
Measuring cycle, values, time, Median value in % and “what to do” are displayed on the LCD, no calibration necessary, USB-portASTM D 3574.Max. sample thickness: 160 mmThe Ball Rebound Tester is suitable for the determination of the resilience by a ball rebound on foam materials according to DIN EN ISO 8307 and Ball Rebound Tester |
|
Available inserts for IRHD:Durometer Hardness System provides hardness readings on elastomers and plastics with a specimen thicker than 6 mm according to IRHD and Durometer hardness. It complies to international standards DIN ISO 48, ISO 48, ASTM D 1415 and DIN 53505. MACRO IRHD SYSTEM Insert Durometer |
|
|
|
Rubber Test Blocks according to MICRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually. |
The patented O-Ring Center Device fully automatically cooperates with the MICRO IRHD SYSTEM. O-Rings with a cord dia. of 0.8 mm to 8 mm will just be placed on the measuring table and pushed to the positioning pin. The cord dia. Is keyed into the MICRO IRHD software. |
|
The Prism Center Device is designed to measure hoses and cables. It is cooperating with: |
|
The durometer conforms to DIN ISO 7619, ISO 868, ISO 7619 and ASTM D 2240. Superior 1/2 point accuracy Time set-up from 1 ....99 s Resolution 0.1 Connected directly to your PC |
|
Model OS-3 and the operating panel DuroLifter for DUROMETER TYPES A, AO, D, B, C, DO, O |
 The Hildebrand Durometer Operating Stand Model OS-2 allows for accurate and repeatable Durometer readings.for DUROMETER TYPES A, AO, D, B, C, DO, O |
 Thickness Gauge for rubber ISO 23529 conform Constant measuring force Resolution 0,001 mm Contact point Ø4 mm (≥35 IRHD) Contact point Ø6 mm (<35 IRHD) |
| Durometer Calibrator The Calibrator comes with weights for calibrating the spring-load of durometers in the A, AO, B, C, D, DO and  O |
